BRE6
Bender Rotary Electric 6 Bar (reference #1)
| Motor: | 2 HP |
| Voltage: | Single or 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 28″ (L) x 18″ (W) x 34″ (H) |
| Weight: | 400 lbs. |
| Hydraulic oil capacity: | 11 gallons |
| Foot Control: | Standard |
| OPTIONS: Benders | Counter Clockwise |
BRE8
Bender Rotary Electric 8 Bar (reference #2)
| Motor: | 5 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 50″ (L) x 36″ (W) x 40″ (H) |
| Weight: | 1200 lbs. |
| Hydraulic oil capacity: | 25 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends, High Speed 7.5 HP w/ Speed Control |
BRE11
Bender Rotary Electric 11 Bar Multi-Directional (reference #3)
| Motor: | 10 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 50″ (L) x 38″ (W) x 40″ (H) |
| Weight: | 2000 lbs. |
| Hydraulic oil capacity: | 32 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends, High Speed 15 HP available |
BRE14
Bender Rotary Electric 14 Bar Multi-Directional (reference #5)
| Motor: | 20 HP |
| Voltage: | Any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 0-15 RPMs |
| Dimensions: | 58″ (L) x 52 ” (W) x 40″ (H) |
| Weight: | 2800 lbs. |
| Hydraulic oil capacity: | 35 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends |
BRE11Z4
Bender Rotary Electric 11 Bar Multi-Directional (reference #4)
| Motor: | 10 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 50″ (L) x 38″ (W) x 40″ (H) |
| Weight: | 2500 lbs. |
| Hydraulic oil capacity: | 32 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends, High Speed 20 HP available |
BRE18
Bender Rotary Electric 18 Bar (reference #7)
| ENGINE | 30 hp. Electric Motor |
| Voltage: | Any voltage 3 Phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 38″ |
| Bender Speed: | 0-15 RPMs |
| Dimensions: | 71″ (L) x 54″ (W) x 40″ (H) |
| Weight: | 4100 lbs. |
| Hydraulic oil capacity: | 60 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends |