CBE6
Push Style Cutter Bender Electric 6 Bar (reference #19)
| Motor: | 1.5 HP |
| Voltage: | 120v-220 Single Phase |
| Cycle: | 50 or 60 |
| Cut Height: | 29″ |
| Bending Table Height: | 34″ |
| Cutter Cycle Time: | 4 Seconds |
| Bender Speed: | Push Style Bender, depends on the bend angle |
| Dimensions: | 36″ (L) x 27″ (W) x 38: (H) |
| Weight: | 440 lbs. |
| Hydrolic oil capacity: | 3.5 gallons |
| Foot Control: | Optional |
| OPTIONS: Cutters Benders | NA |
BRE6
Bender Rotary Electric 6 Bar (reference #1)
| Motor: | 2 HP |
| Voltage: | Single or 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 28″ (L) x 18″ (W) x 34″ (H) |
| Weight: | 400 lbs. |
| Hydraulic oil capacity: | 11 gallons |
| Foot Control: | Standard |
| OPTIONS: Benders | Counter Clockwise |
CBRE6
Rotary Cutter Bender Electric 6 Bar (reference #13)
| Motor: | 2 HP |
| Voltage: | 110/220 Volt Single Phase |
| Cycle: | 60 |
| Bending Table Height: | 32″ |
| Bender Speed: | 5 RPMs |
| Dimensions: | 40″ (L) x 24″ (W) x 35″ (H) |
| Weight: | 500 lbs. |
| Hydraulic oil capacity: | 3.5 gallons |
| Foot Control: | Standard |
| OPTIONS: cutters benders | NA |
CBG6
Push Style Cutter Bender Gas 6 Bar (reference #56)
| Motor: | 3.5 HP Honda |
| Voltage: | N/A |
| Cycle: | 4 |
| Cut Height: | 29″ |
| Bending Table Height: | 34″ |
| Cutter Cycle Time: | 4 Seconds |
| Bender Speed: | Push Style Bender, depends on the bend angle |
| Dimensions: | 36″ (L) x 27″ (W) x 38: (H) |
| Weight: | 440 lbs. |
| Hydrolic oil capacity: | 3.5 gallons |
| Foot Control: | Optional |
| OPTIONS: (Cutters / Benders) | NA |
CBE8HSLS
Push Style Cutter Bender Electric 8 bar with Optional Long Stroke and High Speed Features (reference #20)
| Motor: | 5 HP High Speed |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Cut Height: | 29″ |
| Bending Table Height: | 34″ |
| Cutter Cycle Time: | 3 Seconds |
| Bender Speed: | Push Style Bender, depends on the bend angle |
| Dimensions: | 48″ (L) x 30 ” (W) x 48 ” (H) |
| Weight: | 950 lbs. |
| Hydrolic oil capacity: | 18 gallons |
| Foot Control: | Optional |
| OPTIONS: Cutters Benders | Long Stroke |
BRE8
Bender Rotary Electric 8 Bar (reference #2)
| Motor: | 5 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 50″ (L) x 36″ (W) x 40″ (H) |
| Weight: | 1200 lbs. |
| Hydraulic oil capacity: | 25 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends, High Speed 7.5 HP w/ Speed Control |
CBRE8
Rotary Cutter Bender Electric 8 Bar High Speed (reference #14)
| Motor: | 5 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Cut Height: | 31″ |
| Bending Table Height: | 36″ |
| Cutter Cycle time: | 6 seconds |
| Bender Speed: | 10 RPMs |
| Dimensions: | 70″ (L) x 50″ (W) x 40″ (H) |
| Weight: | 1800 lbs. |
| Hydraulic oil capacity: | 33 gallons |
| Foot Control: | Standard |
| OPTIONS: | Cutters Benders Offset bends, High Speed, Shear Line |
CBRE8D
Rotary Cutter Bender Electric 8 Bar Dual Control, Multi – Directional (reference #15)
| Dual Control (2 person simultaneous operation) | |
|---|---|
| Motor: | 10 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 Cycle |
| Cut Height: | 32″ |
| Bending Table Height: | 36″ |
| Cutter Cycle time: | 1.5 seconds, or slower (Full speed control) |
| Bender Speed: | 0-15 RPMs |
| Dimensions: | 92″ L x 52″ W X 40″ H |
| Weight: | 2400 lbs. |
| Hydraulic oil capacity: | 40 gallons |
| Foot Control: | Standard w/ 2 foot controls |
| OPTIONS: | Cutters Benders Circle or Sprial Attachment, 2 or 4 offset bend, Shear Line |
CBPG8
Portable Cutter Bender Gas 8 bar (reference #25)
| Motor: | 6 HP Gas Robins Subaru or Honda |
| Voltage: | NA |
| Cycle: | 4 cycle gas |
| Cut Height: | 32″ |
| Bending Table Height: | 36″ |
| Bender Speed: | Dependant on bend type, and speed of engine |
| Cutter Cycle Time: | 3 or more seconds (depending on engine speed) |
| Dimensions: | 54″ (L) x 54″ (W) x 50″ (H) |
| Weight: | 950 lbs. |
| Hydraulic oil capacity: | 5.5 gallons |
| Foot Control: | optional |
| OPTIONS: (Cutters, Benders, Portables) | Diesel and Electric power available, Electric start |
CBRPG8
Portable Cutter Bender Rotary Portable Gas 8 bar (reference #22)
| Motor: | 13 HP Electric Start |
| Voltage: | 12 volt |
| Cycle: | 4 cycle gas |
| Cut Height: | 31″ |
| Bending Table Height: | 36″ |
| Cutter Cycle Time: | 3 seconds |
| Bender Speed: | 0 to 12 rpm |
| Dimensions: | 6′ (L) x 5′ (W) x 4′ (H) |
| Weight: | 2200 lbs. |
| Hydraulic oil capacity: | 17 gallons |
| Foot Control: | Standard, MD (Multi-Directional) |
| OPTIONS: | Circle Spiral Attachment, Diesel Power, Removable tongue/tow bar [nectar_btn size=”small” button_style=”regular” button_color_2=”Accent-Color” icon_family=”none” url=”/product/circle-spiral-attachments/” text=”Circle Spiral Attachments”] |
BRPD8
Portable Cutter Bender Rotary Diesel 8 Bar (reference #40)
| Motor: | 14 HP Electric Start |
| Voltage: | 12 volt |
| Cycle: | 4 cycle Diesel |
| Bending Table Height: | 36″ |
| Bender Speed: | 0-12 RPMs |
| Dimensions: | 72″ (L) x 40″ (W) x 40″ (H) |
| Weight: | 1500 lbs. |
| Hydraulic oil capacity: | 17 gallons |
| Foot Control: | Standard |
| OPTIONS: Portable Cutter Bender |
CBRPD8
Portable Cutter Bender Rotary Diesel 8 bar Dual Control (reference #39)
| Motor: | 9.4 HP Electric Start |
| Voltage: | 12 volt |
| Cycle: | 4 cycle Diesel |
| Cut Height: | 31″ |
| Bending Table Height: | 36″ |
| Cutter Cycle Time: | 3 seconds |
| Bender Speed: | 12 rpm |
| Dimensions: | 6′ (L) x 5′ (W) x 4′ (H) |
| Weight: | 2200 lbs. |
| Hydrolic oil capacity: | 16 gallons |
| Foot Control: | Standard, MD (Multi-Directional) |
| OPTIONS:Cutters Benders | Circle Spiral Attachment, Diesel Power, Removable tongue/tow bar |
CBRPD8D
Portable Cutter Bender Rotary Diesel 8 bar Dual Control (reference #37)
| Dual Control (2 person simultaneous operation) | |
|---|---|
| Motor: | 16 HP Kubota 2 cylinder Liquid cooled Diesel |
| Voltage: | 12 volt |
| Cycle: | 4 cycle |
| Bending Table Height: | 40″ |
| Bender Speed: | 0-15 RPMs |
| Dimensions: | 108″ (L) x 60″ (W) x 44″ (H) |
| Weight: | 2700 lbs. |
| Hydraulic oil capacity: | 30 gallons |
| Foot Control: | Standard w/ 2 foot controls |
| OPTIONS: (Cutters, Benders, portables) | |
CBE11HSLS
Push Style Cutter Bender Electric 11 bar Long Stroke (reference #21)
| Motor: | 10 HP High Speed |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Cut Height: | 31″ |
| Bending Table Height: | 36″ |
| Cutter Cycle Time: | 3 Seconds |
| Bender Speed: | Depending on degree |
| Dimensions: | 60″ (L) x 27″ (W) x 50″ (H) |
| Weight: | 1700 lbs. |
| Hydrolic oil capacity: | 32 gallons |
| Foot Control: | Optional |
| OPTIONS: Cutters Benders | 5 HP Available |
BRE11
Bender Rotary Electric 11 Bar Multi-Directional (reference #3)
| Motor: | 10 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 50″ (L) x 38″ (W) x 40″ (H) |
| Weight: | 2000 lbs. |
| Hydraulic oil capacity: | 32 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends, High Speed 15 HP available |
CBRE11
Rotary Cutter Bender Electric 11 Bar Multi – Directional (reference #16)
| Motor: | 10 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Cut Height: | 31″ |
| Bending Table Height: | 36″ |
| Cutter Cycle time: | 6 seconds |
| Bender Speed: | 10 RPMs |
| Dimensions: | 70″ (L) x 50″ (W) x 40″ (H) |
| Weight: | 2700 lbs. |
| Hydraulic oil capacity: | 35 gallons |
| Foot Control: | Standard |
| OPTIONS: | Cutters Benders Dual Control, Offset bends, High Speed, Shear Line |
CBRE11D
Rotary Cutter Bender Electric 11 Bar Dual Control, Multi – Directional (reference #17)
| Dual Control (2 person simultaneous operation) | |
|---|---|
| Motor: | 20 HP (Standard) |
| Voltage: | Any voltage 3 phase |
| Cycle: | 50 or 60 |
| Cut Height: | 31″ |
| Bending Table Height: | 36″ |
| Cutter Cycle time: | 2 seconds |
| Bender Speed: | 0-22 RPMs |
| Dimensions: | 114″ (L) x 52 ” (W) x 40 ” (H) |
| Weight: | 2700 lbs. |
| Hydraulic oil capacity: | 42 gallons |
| Foot Control: | Standard w/ 2 foot controls |
| OPTIONS: | Cutters Benders |
CBPG11
Portable Cutter Bender Gas 11 bar (reference #26)
| Motor: | 8 HP Gas |
| Voltage: | NA |
| Cycle: | 4 cycle gas |
| Cut Height: | 32″ |
| Bending Table Height: | 36″ |
| Bender Speed: | Dependant on bend type, and speed of engine |
| Cutter Cycle Time: | 3 or more seconds (depending on engine speed) |
| Dimensions: | 54″ (L) x 54″ (W) x 50″ (H) |
| Weight: | 1800 lbs. |
| Hydrolic oil capacity: | 5.5 gallons |
| Foot Control: | optional |
| OPTIONS: (Portables, Benders, Cutters) | Electric Starter Diesel, Portable Electric, Other engines also available |
CBRPG11
Portable Cutter Bender Rotary Portable Gas 11 bar (reference #35)
| Motor: | 22 HP Honda 2 CYL. Gas |
| Voltage: | 12 volt |
| Cycle: | 4 cycle |
| Cut Height: | 32″ |
| Bending Table Height: | 38″ |
| Cutter Cycle Time: | 3 seconds |
| Dimensions: | L 76″ x W 62″ x H 50″ |
| Weight: | 2700 Lbs. lbs. |
| Hydraulic oil capacity: | 24 Gallons |
| Foot Control: | Standard |
| OPTIONS: Cutters Benders |
CBRPD11
Portable Cutter Bender Rotary Diesel 11 Bar (reference #23)
| Motor: | 15 HP Kubota 2 CYL. Liquid Cooled Diesel |
| Voltage: | 12 volt |
| Cycle: | 4 cycle |
| Cut Height: | 32″ |
| Bending Table Height: | 38″ |
| Cutter Cycle Time: | 3 seconds |
| Dimensions: | L 76″ x W 62″ x H 50″ |
| Weight: | 2700 Lbs. lbs. |
| Hydraulic oil capacity: | 24 Gallons |
| Foot Control: | Standard |
| OPTIONS: Cutters Benders | Radius/spiral attachment |
CBRPG11D
Cutter Bender Rotary Portable Gas 11 bar Multi Directional Dual Control (reference #24)
| Dual Control (2 person simultaneous operation) | |
|---|---|
| Motor: | 32 HP Kubota 3 cylinder liquid cooled Gas |
| Voltage: | 12 volt |
| Cycle: | 4 cycle |
| Cut Height: | 32″ |
| Bending Table Height: | 40″ |
| Bender Speed: | 0-15 RPMs |
| Cutter Cycle Time: | 1.5 seconds, or slower (Full speed control) |
| Dimensions: | 120″ (L) x 70″ (W) x 44″ (H) |
| Weight: | 3800 lbs. |
| Hydraulic oil capacity: | 34 gallons |
| Foot Control: | 2 Standard |
| OPTIONS: Cutters Benders | |
BRE14
Bender Rotary Electric 14 Bar Multi-Directional (reference #5)
| Motor: | 20 HP |
| Voltage: | Any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 0-15 RPMs |
| Dimensions: | 58″ (L) x 52 ” (W) x 40″ (H) |
| Weight: | 2800 lbs. |
| Hydraulic oil capacity: | 35 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends |
BRE11Z4
Bender Rotary Electric 11 Bar Multi-Directional (reference #4)
| Motor: | 10 HP |
| Voltage: | 220v single phase/any voltage 3 phase |
| Cycle: | 50 or 60 |
| Bending Table Height: | 36″ |
| Bender Speed: | 10 RPMs |
| Dimensions: | 50″ (L) x 38″ (W) x 40″ (H) |
| Weight: | 2500 lbs. |
| Hydraulic oil capacity: | 32 gallons |
| Foot Control: | Standard |
| OPTIONS: | Benders Offset bends, High Speed 20 HP available |
CBRE14
Rotary Cutter Bender Electric 14 Bar Multi – Directional (reference #41)
| Motor: | 30 HP |
| Voltage: | 3 phase only |
| Cycle Time: | 1-6 Seconds |
| Cut Height: | 33″ |
| Bend Height: | 36″ |
| Dimensions: | 8′ (L) X 5′ (W) X 6′ (H) |
| Weight: | 5100 Lbs. |
| Hydraulic oil capacity: | 50 gallons |
| Foot Control: | Single control Standard |
| OPTIONS:Cutters Benders | Left or Right Hand Feed, Shear Line |