CE6
Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)Cutter Electric 6 Bar (reference #8)
Motor: | 1.5 HP |
Voltage: | 120v – 220 Single Phase |
Cycle: | 50 or 60 |
Cut Height: | 29″ |
Bending Table Height: | NA |
Cutter Cycle time: | 4 seconds |
Bender Speed: | NA |
Dimensions: | 36″ (L) x 27″ (W) x 38″ (H) |
Weight: | 310 lbs. |
Hydraulic oil capacity: | 3.5 gallons |
Foot Control: | Optional |
OPTIONS: cutters | NA |
CBE6
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)Push Style Cutter Bender Electric 6 Bar (reference #19)
Motor: | 1.5 HP |
Voltage: | 120v-220 Single Phase |
Cycle: | 50 or 60 |
Cut Height: | 29″ |
Bending Table Height: | 34″ |
Cutter Cycle Time: | 4 Seconds |
Bender Speed: | Push Style Bender, depends on the bend angle |
Dimensions: | 36″ (L) x 27″ (W) x 38: (H) |
Weight: | 440 lbs. |
Hydrolic oil capacity: | 3.5 gallons |
Foot Control: | Optional |
OPTIONS: Cutters Benders | NA |
BRE6
Bender Rotary Electric 6 Bar (reference #1)
Motor: | 2 HP |
Voltage: | Single or 3 phase |
Cycle: | 50 or 60 |
Bending Table Height: | 36″ |
Bender Speed: | 10 RPMs |
Dimensions: | 28″ (L) x 18″ (W) x 34″ (H) |
Weight: | 400 lbs. |
Hydraulic oil capacity: | 11 gallons |
Foot Control: | Standard |
OPTIONS: Benders | Counter Clockwise |
CBRE6
Rotary Cutter Bender Electric 6 Bar (reference #13)
Motor: | 2 HP |
Voltage: | 110/220 Volt Single Phase |
Cycle: | 60 |
Bending Table Height: | 32″ |
Bender Speed: | 5 RPMs |
Dimensions: | 40″ (L) x 24″ (W) x 35″ (H) |
Weight: | 500 lbs. |
Hydraulic oil capacity: | 3.5 gallons |
Foot Control: | Standard |
OPTIONS: cutters benders | NA |
CB6
Circle/Radius Bender 6 Bar (reference #27)
Motor: | 5 HP |
Voltage: | 220v single phase/any voltage 3 phase |
Cycle: | 60 Cycle |
Bending Table Height: | 34″ |
Bender Speed: | 20Ft bar in app. 15 seconds |
Dimensions: | 48″ H x 48″ W x 48″ D |
Weight: | 1250 lbs |
Hydraulic oil capacity: | 22 Gallons |
Foot Control: | Standard |
OPTIONS: (Benders) | Diesel or Gas Available, |
CBG6
Push Style Cutter Bender Gas 6 Bar (reference #56)
Motor: | 3.5 HP Honda |
Voltage: | N/A |
Cycle: | 4 |
Cut Height: | 29″ |
Bending Table Height: | 34″ |
Cutter Cycle Time: | 4 Seconds |
Bender Speed: | Push Style Bender, depends on the bend angle |
Dimensions: | 36″ (L) x 27″ (W) x 38: (H) |
Weight: | 440 lbs. |
Hydrolic oil capacity: | 3.5 gallons |
Foot Control: | Optional |
OPTIONS: (Cutters / Benders) | NA |
CE8HS
Rated 5.00 out of 5 based on 3 customer ratings
(3 customer reviews)Electric 8 Bar Cutter – High – Speed (reference #9)
Motor: | 5 H.P. High Speed Model |
Voltage: | 220v single phase/any voltage 3 phase |
Cycle: | 50 or 60 cycle |
Cut Height: | 36″ / Can be feed left to right or right to left |
Cycle time: | 6 seconds / High Speed Model: 3 seconds |
Dimensions: | 48″ Long x 24″ wide x 48″ tall |
Weight: | High Speed Model 700 Lbs. |
Hydraulic oil capacity: | 18 gal. High Speed Model |
Foot Control: | Optional |
Options: | Cutters Benders |
Load more products
Loading...